Rajmohan Furnishers Rajmohan Furnishers
Rajmohan Furnishers Rajmohan Furnishers
Rajmohan Furnishers Rajmohan Furnishers Rajmohan Furnishers Rajmohan Furnishers Rajmohan Furnishers Rajmohan Furnishers Rajmohan Furnishers
Rajmohan Furnishers Rajmohan Furnishers
Product Range
Rajmohan Furnishers
Rajmohan Furnishers
Rajmohan Furnishers
Home »DMC Steel Cementitious Access/False/Raised Floor System

DMC Steel Cementitious Access/False/Raised Floor System

Cement Solid Filled Panel

Tile size -- 600mm X 600mm
Thickness -- 35 mm

These raised floor system and false floor system consists of steel cement panels, stringers, and steel pedestals. The floor panels of false floor system are epoxy coated unitized shells consisting of a flat steel top sheet welded to a formed steel bottom sheet filled with a highly controlled mixture of lightweight cement.
These non – combustible, rigid, solid panels are highly dependable and universally used .
Raised Floor System, False Floor SystemRaised Floor System, False Floor System
Raised Floor System, False Floor SystemRaised Floor System, False Floor System
request a quote...
The system is available in the following finishes

(i) HPL Based System
PANELS with Antistatic High Pressure Laminate as TOP Finish.

(ii) BARE Panel Based System
Panels without any top covering , such as HPL or VINYL , over Steel surface . Most suitable for office application. Carpet or other coverings can be applied after installation.

Both of the above systems are available in 600mm X 600mm and 800mm X 600mm SIZES
S.NO TYPE SIZE POINT LOAD (in 25 mm sq.) UNIFORM LOAD (PER SQ. MTR) ULTIMATE LOAD
1 DMC 668 600*600*35 MM 3.0 KN 9.0 KN 9 KN
2 DMC 800 600*600*35 MM 3.6 KN 12 KN 10.8 KN
3 DMC 1000 600*600*35 MM 4.5 KN 13 KN 13.5 KN
4 DMC 1250 600*600*35 MM 5.6 KN 17 KN 18.5 KN
5 DMC 1500 600*600*35 MM 6.75 KN 20 KN 20.25 KN


Specification for HPL Finished Systems
It consists of all Steel PEDESTALS and STRINGERS.
Pedestals are all steel construction Zinc plated , made of 25mm Diameter pipe with bottom plate of100mm X 100mm -- 2mm thick and Top plate of 75mm X 75mm – 3mm thick, with threaded bolts and nuts for leveling adjustment.
Stringers are all steel 1.1mm thick rectangular pipe, of size – 30 mm (width) X 21mm ( height ) X 575mm ( length ). Two holes at each end at 550mm Distance to allow it to fix to the pedestal head.

The Pedestals can be pasted / or mechanically fixed to the sub floor. The system can be used with or without stringers – depending upon the requirements and choice of the clients.

The system can be classified as :
a) STRINGER based system
b) STRINGER Free - Corner Lock System

a) STRINGER based system This system based understructure creates a 6000mm X 600mm Grid and enhances stability and improves loading performance. This System can provide a finished floor height ( FFH) of 70mm upto 1200mm.

b) STRINGER Free - Corner Lock System
Ideal for low height office floors, it consists of only PEDESTALS as understructure. Stringers are not used for lateral and loading support. As Pedestal in this system do not have stringers so when panels are opened the floor below is free of stringer grid and very open to approach and hence service.

Rajmohan FurnishersRajmohan Furnishers

Rajmohan FurnishersRajmohan Furnishers
request a quote...
Rajmohan Furnishers Rajmohan Furnishers
Rajmohan Furnishers
product range
Member IndiaMART.com© Rajmohan Furnishers All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Rajmohan Furnishers